29. How to set the access verification mode

1. Click on the menu access control.

2. Click and expand "Other Functions", click "Access Verification Method".

3. Face machine and fingerprint machine do not support setting the door opening authentication method.

4. The access verification method is to support the use of different ways to open the door at different times.

5. The way to read the card is to swipe the card to verify the entry and exit.

6. The password is input with the password keyboard. ("opening password" + # sign)

7. Card plus password is to swipe the card and enter the personal password with the password keyboard to verify the entry and exit.

8. Manually input the card plus password is to cooperate with the password keyboard to input "card number 4 personal password" The key sequence is " "*card number#personal password#".

9. Note: To enable password, card plus password, and manually enter card plus password, you need to set "Access and Exit Card Reader" as a PIN pad card reader in the "Card Reader" module in the device properties.

10. Check the device that needs to set the access! authentication method, set the time period of the access verification method, and check the authentication method to be used.

11. After the setting is successful, click OK and wait for the device to be online within 30 minutes to be delivered to the device.